Already registered? Enter your email and password:First Visit?Create an account
Special Offer Code

Moulded Parts and Fittings

The parts and connectors that join your carbon and fibre glass lengths, and a huge range of end caps for the perfect and safe finish to your project
End Caps

End Caps


End Caps - Perfect for capping the ends of spars to protect kites or pockets. Suitable for many applicationsSoft, pliable cap which fits over the end of a spar to prevent wear and damage to the kite fabric when inserted into a pocket or the nose of a kite. Sourced from various suppliers depending upon price and availability, therefore colours may vary.


Sold in packs of 10, Price Break packs of 100 available
Nocks / Split End Caps

Nocks / Split End Caps


Assorted rigid caps with end slots. These fittings are glued to the end of a spar, along which the sail is tensioned with cord or bungee at the split end. These nocks are sourced from various suppliers (Exel, HQ, Dura), therefore the shape may vary slightly from the image shown.
90° Connector / Leading Edge Connectors

90 Connector / Leading Edge Connectors


Rubber angled fittings to join a spar to the side of another, most commonly these are aproximately 45 degrees, however some of the older style fittings are 90 degrees. Typically used on the leading edge of sports kites to join the spreaders to the leading edge. Can be used in other aplications for creating angled structures
Centre Cross Joint

Centre Cross Joint


A "T" shape fitting, allowing three spars to be joined. Two side spars push in and meet at the middle, and one vertical "spine" slides through the offset central hole. Most commonly used for the spine and spreader connection in sport kites
Sail Grabbers

Sail Grabbers


Either nipple, hook, or folding sail grabbers, used to attach spars directly to the sail cloth. Most commonly used for the stand off to sail connection. Nipple style sail grabbers need a dab of glue to ensure security.
Spar Grabbers

Spar Grabbers


Either clip on, or slide on, these fittings join a larger cross spar, to a smaller connecting spar. Most commonly used for attaching a stand off (for sail tensioning), to a spreader. Can be used for other applications if required
Stopper Clips / C Clips

Stopper Clips / C Clips


Hard plastic C-shaped clips which snap onto the spar next to other frame fittings to hold them firmly in the right position. Can be glued in place.
Dihedral / Angled Cross Connector

Dihedral / Angled Cross Connector


Dihedrals are connect three rods/tubes together... one slides through the fitting acting as a 'spine', the other two fit together to form a swept profile

Yo-Yo Stoppers


These fittings clip onto the leading edge of the sports kites and are there to catch the lines during yo-yo/wrap style tricks.
Miscellaneous Holdall and Buckle Fittings

Miscellaneous Holdall and Buckle Fittings


Fittings for making and repairing holdalls, bags, luggage, strapping. Buckles, clips, tensioners, and toggles