Best Sellers

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £5.60
3 = £15.99
10 = £48.99

6mm x 1m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

1st Quality Ripstop Nylon

Please contact us for colours swatches.

Roll width 153cm..

Mirai Ripstop Nylon 48g/m² - 1st quality, crisp, light weight cloth at aproximately 153cm wide, suitable for general purpose and high spec applications. Mirai is the choice of the famous Peter Lynn Kites and has had many years of astounding success All cloth is measured per meter pulled off the roll, so 1m of purchased fabric will buy a peice of cloth measuring 100cm x 153cm

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £8.40
3 = £23.99
10 = £74.99

6mm x 1.5m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

Ozone

The Highwaymen eShop | Power Kites | Quad Line Power Kites | Ozone

Ozone Imp III Quattro

Ozone's Imp range has the perfect power kite to get you started in the most exciting new sport on the planet. Following the tremendous success with the original Imp, Ozone's designers re-worked it to produce three Imp products: the Imp III Classic, the Imp III Trainer and the Imp III Quattro. All the kites in the range have incredible stability, direct handling and fly perfectly across a wide wind window in light or strong winds.

Ozone Flow

The Flow is Ozone's mid-high performance fixed bridle traction kite and represents a new dimension in buggy, snow-kiting and land-boarding. In designing the Cult's replacement, Ozone has delivered a premium calibre kite with great stability, bags of performance, and an unrivalled price tag.

Ozone Method

The Ozone Method is a kite for anyone who is looking for the speed of a high performance kite, the stability of a beginner kite and yet handles like a sports car! It's your perfect next level engine for taking your traction kiting sports such as buggying or landboarding to new heights!

Ozone Access XT 2011

The Ozone Access XT 2011 is both super stable for people just starting out and unhooked freestylers alike. The Ozone Access XT has been redesigned from the ground up with great turn, constant power / depower both encompassed within the bar throw. Constructed from top quality materials and now featuring a 2 pulley speed-system utilising high spec Ronstan pulleys.

Ozone Frenzy FYX 2011

The new Frenzy incorporates a partially closed leading edge with mesh openings for ultimate performance, clean air intake and extra strength. A newly developed diagonal rib configuration helps optimize bridle line layout; this has enabled us to achieve a 28% reduction in line drag and a more direct feel.

Ozone Manta III 2011

The Ozone Manta M3 2011 is the ultimate kite for any experienced kiter. It is still top of the line but with more power and faster handling making it even more fun to ride and easier to climb terrain.

The Highwaymen eShop > Power Kites > Quad Line Power Kites > Ozone

Product Sections

Store Information